MISSAN SUGAR

Factory & Sugar Cane Plantation In Missan

MOSUL SUGAR

Sugar & Yeast Factories In Mosul

Welcome
CAUTION: Declaration tender bottom of the page   
 Introduction :
          State Company For Sugar Industry is one of  Ministry Of  Industry  & Minerals  figurations, Self funding and Owner to the State completely (Government Sector ) ,  and has incorporeal personality and Finance  Independent & Administrative  and work according to Companies Law No./ 22 , year 1997 .                                                                        
Majer Al-Kabeer District / Missan Province  in  situated      The  Headquarter of Company
Comprising  now from tow factories( Tow Location ) :
   1 - Factory & Sugar Cane Plantation In Missan.
   2 – Factories Of Sugar & Yeast In Mosul .               
 
    Objective

         The Company Intent to Contribute Sustain of national Economic through processing white Sugar from Sugar Cane Crop in Missan , & From Sugar Beet In Mosul and from Imported Raw Sugar as well .and also  Exploiting the by – product ( Molasses , Baggase , Beet Pulp , Lime ) For  other transformative  Industrial  uses (Supplementary Industries )like  processing fresh  bakery Yeast , and Ethyl Alcohol currently produce  in mosul Factories  & paper manufacture currently produce  in Missan in addition to use it as Directly fodders . and There are other a plenty of products can be made from this by – products scheduling within the Future Projects like : Acetic Acid ,Citric Acid , Pressing board …. Etc.

State Company forSugar Industry

 - Advertisement -

 

Ministry of Industry and Minerals

 

 

 

 

State Company for Sugar Industry

 

 

 

 

- Re Advertisement -

 State  company for sugar industry call the specialists and the experienced suppliers to                 participate  in the below tender for providing the co. with the following material ; one (1) steam boiler , two(2) steam generator turbine ,the interested supplier have to visit the head quarter of the company in Misan governorate – almijar alkabeer strict to get the tender against non -refundable amount ( 200000 ) Dinar their offer should be submitted in the offer s box in the head quarter of the co. and the deadline for receiving the offers is 31/ 5  /2010 provided that

 

 

 

 

- For presentation of the offer ( bid ) it should be through only one specific company and the receiving the work according to ( turn key ) .      

 

 

 

 

-The supplier  should present the offer in three sealed envelope shows the name of the co. and the not .of tender and the material ,the first envelop is for technical offer and the second is for the commercial offer and the third envelop should contain the required below documents

 

 

 

 

- Company certificate

 

 

 

 

-Initial guaranties 1% of the amount of offer and it should be in the from of certificate  check or guarantee letter from a fiducially Iraqi bank or a bond  issued by Iraqi government on condition that when the tender awarded the performance bond should be completed to 5 %

 - exemption

 - receipt shows the purchasing of tender

 - the company is not obliged to accept the lower price

 -the cost of issuing and advertisement should be borne by supplier who get the tender

 -Any offer which is not conformable with the general conditions would be neglected

- Also the co. call the whole participants to attends the opening of offers on    1/  6/2010       as well as for any information ,the co. call the  participants to attends the conference which is about to be held in its headquarter on  25/  5/2010 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

From more information pls. visit our web site www. state sugar company .com

 

 

 

 

and ministry of industry web site  www. industery .qov.iq  

 

 

 

 

 

 

 

 

qty

 

 

 

 

Required material

 

 

 

 

Tender no.

 

 

 

 

Itm

 

 

 

 

1

 

 

 

 

Steam Boiler

 

 

 

 

1/t/sugar  -2/2010

 

 

 

 

1-

 

 

 

 

2

 

 

 

 

Steam Generator Turbine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                   

 

 

 

 

 

 

 

 

 

 

Boiler 100 ton / h

 

 

 

 

Description

 

 

 

 

1- one complete water tube natural circulation D type boiler with bidrums with following specification

 

 

 

 

1- 1 capacity 100 ton / h

 

 

 

 

1- design pressure 36bar working pressure 31 bar

 

 

 

 

1-3 super heated steam temp 390 + 10 Cْ

 

 

 

 

1-4 Boiler feedwater pump with motor number (2)

 

 

 

 

       Type: Single suction horizontal multistage

 

 

 

 

       Capacity: 130.000 M3/h

 

 

 

 

      Total head : 45 kg/cm2

 

 

 

 

       Handling liquid temp = 120Cْ

 

 

 

 

1-5 The boiler will work with black oil contemprarly, fuel oil for start up only, natural gas for future .

 

 

 

 

 black oil specification .

 

 

 

 

gravity A..P.I   15.6c                8.0 min

 

 

 

 

flash point p.m .c                     66 min

 

 

 

 

viscosity  s.f.s.50c                    300 max   

 

 

 

 

pour point c                              26.7 max

 

 

 

 

sulfur wt %                              4.5 max

 

 

 

 

carbon residue                         15 max  

 

 

 

 

water & sediment                     2.0 max

 

 

 

 

1-6 Deaeration system

 

 

 

 

With receiver tank capacity = 70 m3 .

 

 

 

 

2- The boiler system will include the following Itms .

 

 

 

 

2-1 Dual drive FD fan ( elect . motor and steam turbine ) with forced lubrication system .

 

 

 

 

2 -2 Ignitor and burner .

 

 

 

 

2-3 complete starter should be suitable for required fan circuit Breaker , Including vacuum meters ( volt meters & Ammeters )

 

 

 

 

Earth fault relay

 

 

 

 

Under voltage relay

 

 

 

 

Motor protection relay

 

 

 

 

Voltage transformers

 

 

 

 

Current Transformers

 

 

 

 

Power Fuse high voltage

 

 

 

 

Control Fuse

 

 

 

 

Auto restart relay in case under voltage less than 4sec .

 

 

 

 

2-4 complete computerized control system with ( PLC ) or ( DCS ) also the vendors must supply the software and programming unit if required and should be installed in dedicated room near the boiler .

 

 

 

 

2-5 The specification of feed water exist

 

 

 

 

       PH=8.0 – 9.5                       Hardness as caco3 = 0

 

 

 

 

       Dissolved oxygen                 less than 0 – 03 ppm

 

 

 

 

       Total solid                            less then 500 ppm

 

 

 

 

       Silica                                    less then 20 ppm    

 

 

 

 

 The vender should supply chemical injection skid including chemicals for on year opration as you're recommended .   

 

 

 

 

2-6 Boiler to be supplied with all instrumentation Including sight glasses both sides ( level indicator ) ( double level transmitter for steam drum level with recorder ) O2 , CO2 analyzers .

 

 

 

 

2-7 smoke stack not less than 35M .

 

 

 

 

3- spare parts as following : ( boiler spare parts )

 

 

 

 

3-1 10 % spare part for pipes ( from S.D to W.D Furnace tube )

 

 

 

 

3-2 10 % spare part super heater coil .

 

 

 

 

3-3 10 % spare part Economizer coil .

 

 

 

 

3-4 spare parts for burner consist of ( tip of burner , control valve , vent valve , Igniter )

 

 

 

 

3-5 spare part for starter for 2 years power .

 

 

 

 

3-6 1 set of FD fan bearings

 

 

 

 

3-7 1 set of turbine bearings

 

 

 

 

3-8 1 set of motor bearings

 

 

 

 

3-9 complete coupling between motor & FD fan .

 

 

 

 

4- Training

 

 

 

 

The supplier will cover cost of training for 8 person in the manufacturer country or countries have the same boiler for 2 weeks .

 

 

 

 

5- 5-1 supplier should supply safety valves, manual valves with standards like ( ASME )

 

 

 

 

5-2 The supplier should provide manual for Insulation and Explain the method of working

 

 

 

 

5-3 supply Rolling machine ( hydraulic machine ) and Expander for tubes in steam drum and Water. drum and prefer hydraulic type with different type and size .

 

 

 

 

5-4 The control system should be DCS or PLC and supply all vendors requires .

 

 

 

 

6- supplier should complete all civil engineering works( foundation , anchor bolts , sheds,  supports , Rooms , platfrom , stairway )

 

 

 

 

7- Insulation for whole system ( heat exchanger ) piping .

 

 

 

 

8- origin prefer, western Europe , Japan and U.S.A .

 

 

 

 

 

 

 

 

Steam Turbine Generator  ( 2 )

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description      

 

 

 

 

Capacity = 5.5 MW \ H

 

 

 

 

Inlet steam pressure = 20 – 25 bar max

 

 

 

 

Outlet steam pressure = 4.5 bar

 

 

 

 

Inlet steam temp = 360 + 10 Cْ

 

 

 

 

Complete instaltion in site , Exist foundation dimension = max , overall , dimensions of turbo

 

 

 

 

Longitudinal / axial          9100 mm

 

 

 

 

Vertical / IP                       3300 mm

 

 

 

 

Transverse                        4200 mm                      

 

 

 

 

( 2 )- Auxiliary lub oil system each turbine . output voltage 11 KV 50 HZ

 

 

 

 

Prefer RPM for electric dynamo = 1000 rpm or 1500

 

 

 

 

Synchronizing panel between tow generators and between tow generators and national net, Air circuit breaker 11 KV for each generator .

 

 

 

 

Inspection certification from specialized Authority whole job .

 

 

 

 

The supplier will cover cost of training for 8 person in the manufacturer country or countries have the same Steam turbine generator for 2 weeks .

 

 

 

 

Cooling water pumps suitable for the purpose with piping herewith photos for Exist steam turbine cooling water pond utility basin .  

Announcement

 

 

      The Mosul Sugar factory one of Ministry of Industry and Minerals formations announces a tender (1/SGR-1/2010) of designing, implementing and operating an industrial water treatment unit for Mosul Sugar and Yeast factories discharges, according to the permitted environmental limitations and standards of Rivers Maintenance and State Waters No. (25) for  1967 and its attached amendments  .                                                                                                

 

 

     Whoever specialized contracting companies, desire to participate in this tender shall present their bids to the commercial directorate / Mosul factories ending of official time in Tuesday (15/6/2010) and may obtain the tender conditions from the commercial directorate/ Mosul factories, for unrecoverable sum of (200000) ID, The bidder should submit (bid band) (1%) of total offer according to ratified check letter of credit or bank guarantee by depending Iraq bank .

 

 

 

 

For more information visit our website

 

 

www.Statesugarcompany.com

 

 

 

 

ministry of industry and minerals website

 

 

www.INDUSTRY.GOV.IQ

 

 

 

 

 

 

 

 

Director General

 

 

 

 

 

 

 

 

 

 

 

 

Ministry of Industry and Minerals

 

 

State Company of Sugar Industry

 

 

Mosul Sugar and Yeast factories

 

 

 

 

Tender No. 1/SGR-1/2010

 

 

 

 

 

 

     The project includes establishing an integrated industrial and sanitary water treatment plant for Mosul Sugar, Yeast and Alcohol factories discharges applying zero ground method (TURN KEY JOB) .

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

             The closing date

 

 

                          &n

2010 © State Company For Sugar Industry.Design by: Spot Sites